Back on track with the sharps refinish, let-off buttons and hammer rest repairs, I was looking forward to the last bits before reassembling the action: key leveling and key weights.
Continue reading →
This far into the action rebuild, and I confess to a little project fatigue. After so many months, the end seemed to be receding into the distance. After the excitement of receiving new hammers, I lost a month to a California trip and other things around the ranch that needed attention, and it was a little hard to get my head back into the game.
Continue reading →
We got back from the Red Power Roundup and it was time to catch up on the Weber project. Bernard texted me (with pictures!) that the hammers had arrived from Renner, and I was eager to see them. I went to his shop a few days later.
Continue reading →
Another trip to Bernard’s piano shop and another list of tasks. I installed most of the rocker capstans (#2 in the diagram above) with the new square-drive screws at home, and used a little wax softened with mineral spirits to avoid … Continue reading →
I’ve been making progress on the Weber Project, but with a trip to New Mexico and various Spring activities, the pace has lagged. We’re back on track though. I mentioned in the last post that more work was needed on the bushings — they were too tight for the keys to move freely in the keyframe.
Continue reading →With key bushings installed, it was back to the piano shop. In order to test the work, we would need to try a few keys in the keyframe and see they fit. First though, a little cleanup was in order. … Continue reading →
So far, we’ve removed the action from the piano, disassembled, and cleaned it. There’s a surprising amount of effort involved in just those steps, and it was great to finally make progress in the rebuild. Make no mistake, the disassembly and … Continue reading →
In my last post, I listed the various tasks to finish key restoration. During the week, I was able to get the remaining tools to install bushings. These include a brush to apply hide glue, a small painting knife to … Continue reading →
After bringing the piano keys home from Bernard’s shop last week, I was hoping to remove the key bushings and clean the wooden, ebony and ivory parts. To remove the bushings, I rigged up an old travel-sized clothes steamer and … Continue reading →
To paraphrase the old saw, into every life, a little appliance repair must fall. This must be my week. We’ve been living at Roy Creek Ranch since 1996, and the appliances are admittedly getting old. So far, I’ve replaced a … Continue reading →