Weber Piano Project – Keyframe Cleanup

With key bushings installed, it was back to the piano shop. In order to test the work, we would need to try a few keys in the keyframe and see they fit. First though, a little cleanup was in order. … Continue reading

Weber Piano Project – New Bushings!

So far, we’ve removed the action from the piano, disassembled, and cleaned it. There’s a surprising amount of effort involved in just those steps, and it was great to finally make progress in the rebuild. Make no mistake, the disassembly and … Continue reading

Solar Powered Rainwater Project

If you’ve been following along, you’ve noticed several solar-powered projects here at Roy Creek Ranch. From a simple system to “top-up” the storage battery in the Teardrop trailer and upgrading it to make an off-grid camper, to powering my amateur radio … Continue reading

Weber Action Rebuild – Key Cleaning Update

In my last post, I listed the various tasks to finish key restoration. During the week, I was able to get the remaining tools to install bushings. These include a brush to apply hide glue, a small painting knife to … Continue reading

Weber Action Rebuild – Removing Bushings and Cleaning

After bringing the piano keys home from Bernard’s shop last week, I was hoping to remove the key bushings and clean the wooden, ebony and ivory parts. To remove the bushings, I rigged up an old travel-sized clothes steamer and … Continue reading

Weber Grand Piano Action – Teardown

After months of discussion and planning, we were ready to rebuild the action in the Weber grand piano. I had moved the action to Bernard Mollberg’s shop near Blanco, Texas the previous week, and was looking forward to starting. Arriving at the … Continue reading

Rebuilding another Piano – an 1893 Weber Grand

In an earlier post about Rebuilding A Piano, I mentioned an older piano — A Weber 6-foot, 2-inch grand. I bought it from the University of Nebraska at Omaha after winning the James B. Peterson Concerto Competition. As part of … Continue reading

International Harvester 254 – Ignition Switch

I purchased a used tractor in 2003 after moving a truckload — literally 14 cubic yards — of gravel with a wheelbarrow, and deciding I didn’t want to do that again. It’s an International Harvestor model 254, a three-cylinder diesel … Continue reading

The Shed Roof — Storing Lumber in the Shop

I built the shop at least 15 years ago, and it’s been one of the most useful projects here at the ranch. Originally, I was imagining a woodworking shop, and I even built a large, low bench and acquired some … Continue reading

The Tiny House Door

Originally, Lisa and Alva were planning to purchase a commercial door for the tiny house. It made sense since door and window manufacturers can produce excellent products at reasonable prices. Or so we thought. As it turned out, the odd … Continue reading